Search
Filters
Close

LHR15III Rupes Mark III

15mm FREE SHIPPING!!
SKU: LHR15III
Free shipping
Manufacturer: RUPES
$455.00

FREE SHIPPING ON THIS ITEM!!

Built to handle any detailing situation, the new LHR 15 MarkIII is the new frontier of detailing. The ergonomic design allows for precise paint correction with complete comfort, in curved surfaces and difficult to reach areas. The LHR 15 MarkIII operates at a higher rpm compared to the LHR21 MarkIII. This increased speed provides equivalent correction and does so with a pad diameter and orbit that are more conducive to curved or varied surfaces.

IMPROVED ERGONOMICS

The rubberized front grip of the MarkIII offers exceptional comfort for the operator while providing a non-slip surface for control. The improved rear handle also integrates rubberized surfaces for improved feel. Two strategically placed, non-marking, tool rests provide stability when the tool is not in use as well as additional protection against unintended impact. The continued refinement of the BigFoot random orbital platform in MarkIII reinforce its best in class reputation, making the best even better.

ELECTRONIC SPEED CONTROL DIAL

The new electronic speed control dial allows for easy adjustment of the top speed of the polisher without requiring the operator to move his hands. The larger dial is easily adjusted with a move of the thumb. High visibility numbers and a more positive feedback from the movement of the dial make speed changes feel more deliberate, allowing operators to select the ideal speed for the task without any interuption to the polishing process.

PROGRESSIVE TRIGGER

Adding an additional layer of control is the new progressive trigger. Acting as a throttle to control speeds within the dial range, the progressive trigger allows the operator to make subtle adjustments for precise control without interuption of the process or need to reposition the grip to access the speed dial.

DESIGN

Attention to detail is something more than just attractive design. Every detail, such as the rubber support positioned on the body of the machine to keep it stable during the non-working stages , is the result of meticulous research aimed at achieving maximum operator comfort.

 

IMPROVED ERGONOMICS

 

The rubberized front grip of the MarkIII offers exceptional comfort for the operator while providing a non-slip surface for control. The improved rear handle also integrates rubberized surfaces for improved feel. Two strategically placed, non-marking, tool rests provide stability when the tool is not in use as well as additional protection against unintended impact. The continued refinement of the BigFoot random orbital platform in MarkIII reinforces its best in class reputation, making the best even better.

TUNED ELECTRONIC SPEED MODULE

The new electronic speed control dial allows for easy adjustment of the top speed of the polisher without requiring the operator to move his hands. The larger dial is easily adjusted with a move of the thumb. High visibility numbers and a more positive feedback from the movement of the dial make speed changes feel more deliberate, allowing operators to select the ideal speed for the task without any interruption to the polishing process. The module has also been tuned to deliver peak torque and speed in the optimal dial ranges.

PROGRESSIVE TRIGGER

Adding an additional layer of control is the new progressive trigger. Acting as a throttle to control speeds within the dial range, the progressive trigger allows the operator to make subtle adjustments for precise control without interruption of the process or need to reposition the grip to access the speed dial. The linear delivery of power allows for very fine adjustment within each speed range giving technicians a whole new dimension of control.

 

LONGER CORDS

 

The Mark III comes standard with a 9 meter (29.6 ft) cord on both the LHR15 and LHR21 models. The longer cord provides users enough length to move more effortlessly around their workshop or studio without the need for additional extension cords or searching for a nearby outlet.

 

TECHNICAL DATA

Backing Pad     125mm– 5″

Orbit         15mm – 19/32″

Power        500 watt

R.P.M.        3000 – 5200

Weight       2.6 kg– 5.73 lbs

Speed Control    yes

Progressive Trigger  yes

Spindle Thread     M8-F

Backing Pad Supplied #980.027N

Electrical Cord      9m – 29.6 ft

FREE SHIPPING ON THIS ITEM!!

Built to handle any detailing situation, the new LHR 15 MarkIII is the new frontier of detailing. The ergonomic design allows for precise paint correction with complete comfort, in curved surfaces and difficult to reach areas. The LHR 15 MarkIII operates at a higher rpm compared to the LHR21 MarkIII. This increased speed provides equivalent correction and does so with a pad diameter and orbit that are more conducive to curved or varied surfaces.

IMPROVED ERGONOMICS

The rubberized front grip of the MarkIII offers exceptional comfort for the operator while providing a non-slip surface for control. The improved rear handle also integrates rubberized surfaces for improved feel. Two strategically placed, non-marking, tool rests provide stability when the tool is not in use as well as additional protection against unintended impact. The continued refinement of the BigFoot random orbital platform in MarkIII reinforce its best in class reputation, making the best even better.

ELECTRONIC SPEED CONTROL DIAL

The new electronic speed control dial allows for easy adjustment of the top speed of the polisher without requiring the operator to move his hands. The larger dial is easily adjusted with a move of the thumb. High visibility numbers and a more positive feedback from the movement of the dial make speed changes feel more deliberate, allowing operators to select the ideal speed for the task without any interuption to the polishing process.

PROGRESSIVE TRIGGER

Adding an additional layer of control is the new progressive trigger. Acting as a throttle to control speeds within the dial range, the progressive trigger allows the operator to make subtle adjustments for precise control without interuption of the process or need to reposition the grip to access the speed dial.

DESIGN

Attention to detail is something more than just attractive design. Every detail, such as the rubber support positioned on the body of the machine to keep it stable during the non-working stages , is the result of meticulous research aimed at achieving maximum operator comfort.

 

IMPROVED ERGONOMICS

 

The rubberized front grip of the MarkIII offers exceptional comfort for the operator while providing a non-slip surface for control. The improved rear handle also integrates rubberized surfaces for improved feel. Two strategically placed, non-marking, tool rests provide stability when the tool is not in use as well as additional protection against unintended impact. The continued refinement of the BigFoot random orbital platform in MarkIII reinforces its best in class reputation, making the best even better.

TUNED ELECTRONIC SPEED MODULE

The new electronic speed control dial allows for easy adjustment of the top speed of the polisher without requiring the operator to move his hands. The larger dial is easily adjusted with a move of the thumb. High visibility numbers and a more positive feedback from the movement of the dial make speed changes feel more deliberate, allowing operators to select the ideal speed for the task without any interruption to the polishing process. The module has also been tuned to deliver peak torque and speed in the optimal dial ranges.

PROGRESSIVE TRIGGER

Adding an additional layer of control is the new progressive trigger. Acting as a throttle to control speeds within the dial range, the progressive trigger allows the operator to make subtle adjustments for precise control without interruption of the process or need to reposition the grip to access the speed dial. The linear delivery of power allows for very fine adjustment within each speed range giving technicians a whole new dimension of control.

 

LONGER CORDS

 

The Mark III comes standard with a 9 meter (29.6 ft) cord on both the LHR15 and LHR21 models. The longer cord provides users enough length to move more effortlessly around their workshop or studio without the need for additional extension cords or searching for a nearby outlet.

 

TECHNICAL DATA

Backing Pad     125mm– 5″

Orbit         15mm – 19/32″

Power        500 watt

R.P.M.        3000 – 5200

Weight       2.6 kg– 5.73 lbs

Speed Control    yes

Progressive Trigger  yes

Spindle Thread     M8-F

Backing Pad Supplied #980.027N

Electrical Cord      9m – 29.6 ft

Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Customers who bought this item also bought

D-A FINE PADS

HIGH PERFORMANCE FINISHING FOAM PAD
$8.95

Rupes Uno Advanced

Uno Advanced Stand Alone Protection and Maintenance Polish
$17.95

D-A FINE

HIGH PERFORMANCE FORMULA
$15.95